The concept here is a simple box and ribs with slanted valleys for drainage. The main pine carpentry will be the form and the waterproof will be some form of either epoxy coat or even truck bed liner spray. The Form will be custom fitted to the space. The ribs should have around 2 inches of gap to make cleaning easier. The faucet will be mounted on a separate board and that is mounted to the frame of the sink. I'm estimating about $60 dollars of wood and a coating kit between $40 to $85. To put it into perspective, a real darkroom sink starts at $700. The water temperature mixing might be carried out with a contraption of half inch pipes feeding into a one inch and a half inch pipe with a center port out. One tube ported to inject water across and the other to inject with two streams towards the other side or at least that is the hope.
No comments:
Post a Comment